Author Topic: Engines for sale  (Read 7025 times)

rcign

  • Global Moderator
  • Newbie
  • *****
  • Posts: 26
    • RC Ignitions
Engines for sale
« on: January 17, 2012, 12:54:13 AM »
I have found a source for less expensive G62 engines...Daves Discount motors sells nw G62 short blocks for $299 without ignition parts or hubs...I can convert these for $125..Ignitions are RC EXL original style with the old C&H timing curve, 28 BTDC at 4000 rpm, 4 BTDC after first flip for starting...$125 tp convert one of these with the stock flat back plate mount...I use the NGK BPMR6F short spark plug...$150 with igniton in the mount...
Also 3 good used G62s. price on request depending on requested specs...
I new DA 50 #11000+..With Pitts mujffler..Run twice for comparison testing..
I new Fox 4.8 twin with mufflers and RC EXL igniton
1 new DLE30 rear carb style, run for testing
2 old style Walker machine Sachs 4.2s with old style C&H ignition...Previously run bet perfect..
2 new G38s, special short length, run only for testing, 5 1/2 inches long
2 new Zenoah G20s with EXL ignition..One has ignition inside the rear case, other is stock...
4 or 5 Quadra 35s or 42s, used good condition...
Some miscellaneous Chinese gassers, 20 to 50 ccs.
1 JC 100 twin, an early one from Milton Thompson, used but good, just not as strong as some of the others..
A few old Zenoah G23s. the ones with points in the rear case...At least 1 has not been run.
All money back guarantee if returned in the same condition as received..
There will be a new FOR SALE section here when I can get it done...
My webmaster just ran the PF Chang marathon in Phoenix, gotta give him some recovery time :)
« Last Edit: January 17, 2012, 01:01:30 AM by Alex »
Stupid is a condition, Ignorance is a choice
If you can't dazzle 'em with brilliance, baffle 'em with BS

smokdup

  • Newbie
  • *
  • Posts: 1
Re: Engines for sale
« Reply #1 on: February 10, 2012, 05:11:36 PM »
do u have a 26cc chinese engine

rcign

  • Global Moderator
  • Newbie
  • *****
  • Posts: 26
    • RC Ignitions
Re: Engines for sale
« Reply #2 on: February 10, 2012, 08:39:15 PM »
DLE 30 rear carb . almost new, $225 + shipping....
Stupid is a condition, Ignorance is a choice
If you can't dazzle 'em with brilliance, baffle 'em with BS

karolh

  • Newbie
  • *
  • Posts: 4
Re: Engines for sale
« Reply #3 on: February 20, 2012, 07:43:21 PM »
Can the G23 with breaker points be converted to CD ignition, and if so what would the total cost be.

Karol


rcign

  • Global Moderator
  • Newbie
  • *****
  • Posts: 26
    • RC Ignitions
Re: Engines for sale
« Reply #4 on: February 21, 2012, 12:32:07 AM »
$50..
Stupid is a condition, Ignorance is a choice
If you can't dazzle 'em with brilliance, baffle 'em with BS

karolh

  • Newbie
  • *
  • Posts: 4
Re: Engines for sale
« Reply #5 on: February 22, 2012, 01:23:59 PM »
$50..

Ralph I was referring to the cost of a used engine from you including the ignition conversion.

Karol
« Last Edit: February 22, 2012, 01:25:55 PM by karolh »

rcign

  • Global Moderator
  • Newbie
  • *****
  • Posts: 26
    • RC Ignitions
Re: Engines for sale
« Reply #6 on: February 22, 2012, 04:12:01 PM »
Old style G2D $125, new style PUH $175...
Stupid is a condition, Ignorance is a choice
If you can't dazzle 'em with brilliance, baffle 'em with BS

Roo Man

  • Newbie
  • *
  • Posts: 12
Re: Engines for sale
« Reply #7 on: February 22, 2012, 07:09:28 PM »
Karol,

What will this one go on?

Gary
What goes around comes around.

Gary

gboulton

  • Newbie
  • *
  • Posts: 2
  • Balsa dust was flying everywhere
    • Night Sky Forums
Re: Engines for sale
« Reply #8 on: March 21, 2012, 06:17:40 AM »
Ralph,

Do you still have the DLE 30?
˙ǝʌısuǝdxǝ sı dn 'dn sı uʍop

flyngatorboy

  • Newbie
  • *
  • Posts: 1
Re: Engines for sale
« Reply #9 on: August 08, 2012, 04:44:33 PM »
hi Ralph looking for a g-26 or 23 in good shape.